Mooney CDL Training Blog Post Backing
In this blog post, Chick Mooney offers some tips and tricks for backing.
Tractor Trailer Backing—Tips and Tricks
Hey guys, Chick Mooney here with Mooney CDL (www.moonecdltraining.com). I want to talk today about backing.
Some of the most common accidents we have out there are when we’re backing and we back into something we didn’t see. To avoid these accidents, some of the steps we should probably keep in mind as we pull up to a dock or a place where we know we’re going to make a delivery or a drop are:
Get Out And Look
We want to go ahead and scout out the area first, clear the area, if we need to let’s go ahead and stop the truck in a safe place, hop out, look around. The acronym G.O.A.L. (get out and look) always applies. It’s better to stop, give it a good look, get back in the truck knowing what to expect, rather than getting caught in a tight position or a position you can’t get out of.
Don’t Delay Backing
So, get out and look, and then once you’ve verified and looked at it, don’t waste any time backing into your spot. If you go ahead and delay backing, the environment may change. Unless you, after you’ve already scouted the area, go ahead and back immediately.
Find an Extra Set of Eyes
Also, get somebody to help you. There’s nothing wrong or shameful or bad about having somebody be another set of eyes for you. If you have a driving partner, or somebody at the dock that’s willing to help, have them hop out. First off, though, you want to both be on the same page with your hand signals. Know what stop is, or both of you agree what stop is. Know what “keep coming back.” Know other hand signals that you want to keep in mind when you’re doing this. But both of you be on the same page with hand signals.
Back to the Driver’s Side
When you’re backing you want to do it to the driver’s side. Watching the driver’s mirror, it’s easier that way, rather than blindsiding or backing in on your blind side.
Tap the Horn a Few Times as You Back
For help and notifying everyone around you, if you give the horn a few taps. And every few seconds or every little bit, give that horn some more taps. You’re keeping everybody around you informed that you’re moving.
Get Out And Look, Again
Then as you go ahead and get close, if it’s a delicate spot where you need precision on your backing, once you get close, get out and take a look. Judge the distance, come back up and give yourself some reference points here in the cab.
Finish Your Back
And then finish your back, or continue to use a helper. Either way, back in soft, look around, take it all in. The two biggest things though, get out and look, verify before you back and back right after you’ve done your verification, back to driver’s side.
Hope that helps, hope to see you out there.
Now go drive your dreams.
Be sure to subscribe to see each new post and gain from Chick's experience and insight driving for over thirty years.
This content is provided for entertainment purposes and holds no warranty or representations of any kind concerning the accuracy or suitability of this information. Use at your own risk. All rights reserved.